Display Setup-Cs On/Off - Honeywell S7800A1142 Manual

Display Setup—CS ON/OFF
CS ON/OFF allows the Call Service Message to be as follows:
• OFF—No call Service Message displayed, normal 7800
SERIES lockout message displayed.
• ON—Customized Call Service Message displayed on 7800
SERIES lockout. Goes away when 7800 SERIES reset
button is pushed—just like a normal lockout.
• ON, Temporarily Off— Used for service technician to view
normal 7800 SERIES Lockout messages along with
diagnostic and history files. After 5 minutes, the display
goes back to the Call Service On mode.
DISPLAY Setup will appear. Enter your password if you have
changed the default password.
Fig. 68. DISPLAY Setup/PASSWORD screen.
Press ENTER using the two ENTER buttons at the same time.
Fig. 69. Select/Exit screen.
Choose Select.
Fig. 70. DISPLAY Setup/Select CLONE screen.
Use the down arrow to scroll through the menu choices until
CS ON/OFF appears.
Fig. 71. DISPLAY Setup/Select: CS ON/OFF screen.
Press ENTER using the two ENTER buttons at the same time.
Fig. 72. Select/Exit screen.
Press Down arrow to Select.
7800 SERIES S7800A1142 KEYBOARD DISPLAY MODULE
Fig. 73. CS ON/OFF screen.
Use the up/down arrows to select (ON, OFF, or ON,
Temporarily OFF).
Fig. 74. Save Changes/Exit no Save screen.
Use down arrow to Save.
Fig. 75. DISPLAY Setup/Select CLONE screen.
Use up or down arrows to move to another selection. If ENTER
is pressed, the following screen appears:
Fig. 76. Select/Exit screen.
Choose up arrow to exit to normal display function.
Display Setup—CS TEST
CS TEST allows the Call Service message to be viewed.
Accuracy and appearance can be viewed without putting the
7800 SERIES into lockout.
To access the CS TEST menu:
Press the left three buttons of the KDM for one second, then
release.
DISPLAY Setup will appear. If you have a personal password,
enter it to enter setup.
Fig. 77. DISPLAY Setup/PASSWORD screen.
Press ENTER by pressing the two ENTER buttons at the same
time.
31 65-0288-1