Honeywell S7800A1142 Manual page 33

Press ENTER by pressing the two ENTER buttons at the same
time.
Fig. 89. Select/Exit screen.
Choose Select.
Fig. 90. DISPLAY Setup/Select CLONE screen.
Use the down arrow to scroll down through menu choices until
CS EDIT appears.
Fig. 91. DISPLAY Setup/Select CS EDIT screen.
Press ENTER using the two ENTER buttons at the same time.
Fig. 92. Select/Exit screen.
Choose Select.
Fig. 93. Call Service Setup/Edit Screen 1 screen.
Press ENTER using the two ENTER buttons at the same time.
Fig. 94. Select/Exit screen.
Choose Select.
7800 SERIES S7800A1142 KEYBOARD DISPLAY MODULE
Fig. 95. LOCKOUT screen.
Using the left/right arrow will move the cursor left and right. Up
and down arrows will move you through the series of available
scripts (See Table 9). Up to 20 characters per line (you have
two lines available) can be used in your message.
NOTE: Moving through the scripts:
1. Pressing and holding an up/down arrow will fast
forward to the end of the current script.
2. A space is located between the capital and lower
case alphabets.
3. A space is added if you move the cursor right
when it is under an empty character position.
Pressing the ENTER keys will show:
Fig. 96. Save/Exit/Clear EOL screen.
Pressing the left arrow will clear text on the line you are on and
return you to the CS Edit screen. When you have finished
entering your description, press the ENTER keys.
Fig. 97. Save/Exit/Clear EOL screen.
Press the down arrow to Save.
Fig. 98. Call Service Setup screen.
Use the up arrow to go to screen 2 or 3. Repeat the above
steps for custom messages you wish to create. When
complete with your final message, press ENTER.
Fig. 99. Save/Exit/Clear EOL screen.
Use the up arrow to select Exit.
33
< Clear
< Clear
< Clear
65-0288-1