Introduction; Features; Package Contents - Eizo RadiForce GS320-CL Instructions For Use Manual

1. INTRODUCTION

Thank you for choosing an EIZO Monochrome Monitor.

1-1. Features

• DVI (p. 36) Digital input compliant for TMDS (p. 36)
• [Horizontal scanning frequency]
[Vertical scanning frequency]
[Frame synchronous mode]
[Resolution]
• CAL Switch function for selecting an optimal calibration mode (p. 22)
• Selectable screen compliant with DICOM Part 14 (p. 36)
• USB (Universal Serial Bus) hub support (p. 25)
• Utility software "ScreenManager Pro for Medical", which enables control of the
monitor from a Windows PC with a mouse or keyboard (refer to the EIZO LCD
Utility Disk).
• Monitor stand adjustable for different heights
• Slim bezel
• Built-in Swing Sensor
* 1
This sensor is used when calibrating the monitor with the exclusive software
RadiNET Pro / RadiCS (see "Options" p. 34).
Storing or using the sensor at a temperature of under 30°C and a humidity of under
70% is recommended, or it may affect the accuracy of the measurement. Avoid
storing or using the sensor where it may be exposed to direct sunlight.

1-2. Package Contents

Please contact your local dealer for assistance if any of the listed items are missing or
damaged.
• LCD Monitor
• Power Cord
• Signal Cable (FD-C39)
• EIZO USB Cable (MD-C93)
*1
The landscape position is the default monitor orientation. For the portrait position, rotate the
monitor ninety degrees counter-clockwise before installing it.
NOTE
• Please retain the packing materials for future transport of the monitor.
*1
(GX320-CL only)
*1
31 - 100 kHz
29.5 ~ 71.5 Hz (VGA text: 69 - 71 Hz)
59 - 61 Hz supported
3M pixels (Portrait: 1536 × 2048 dots (H × V))
• EIZO LCD Utility Disk
• User's Manual
• LIMITED WARRANTY
• Cleaning Kit "ScreenCleaner"
(GX320-CL / GS320-CLG only)
English
1. INTRODUCTION
9