Gravely 991091 Owner's/Operator's Manual page 7

Table of Contents

Advertisement

3. DANGER!
Discharge Hazard –
NEVER direct discharge
toward people, pets or
property. Thrown objects
can cause injury or
damage.
Amputation Hazard –
NEVER stick hands or feet
under deck or shielded
areas.
Shut off engine, remove
key, and read manual
before servicing or making
adjustments to unit.
Keep children and others
away from unit while unit is
in operation.
Keep feet and hands away
from all rotating or moving
parts.
DO NOT step or stand in
this area.
4. DANGER!
Discharge Hazard –
NEVER operate unit
without discharge chute
in operating position.
Thrown objects can
cause injury or damage.
Do not operate mower
unless all guards are in
operating position or
bagger is attached.
5. HOT SURFACES!
6. ROTATING PARTS!
7. DANGER!
SAFETY RULES
This cutting machine is capable of amputating
hands and feet and throwing objects. Failure
to observe the following safety instructions
could result in serious injury or death.
The following safety instructions are based
on recommendations found in ANSI standard
B71.1-2003.
Training
Read, understand, and follow all instructions
on the machine and in the manuals before
starting.
Be sure the area is clear of bystanders and
pets before operating. Stop machine if
anyone enters the area.
Improper use of power equipment can cause
serous permanent injury or death to the
operator or a bystander.
Understand:
How to operate all controls
The functions of all controls
How to STOP in an Emergency
Braking and steering characteristics
Turning radius and clearances
If the operator or the mechanic cannot read
the manual, it is the owner's responsibility to
explain it to them.
Always train any inexperienced operators
and require them to read and understand all
manuals and decals.
EN - 7
DO NOT touch parts
which are hot from
operation. ALWAYS allow
parts to cool.
AVOID INJURY. Stay
clear of rotating parts.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zt hd48Zt hd52Zt hd60Zt hd44Zt hd44 carbZt hd48 carb ... Show all

Table of Contents