Conductivity; Consumption Data; Consumption - Miele TWL 780 WP Operating Instructions Manual

Settings

Conductivity

This setting is only relevant for regions
with very soft water.
Very soft water can result in unsatis-
factory drying results.
You should only select this setting if
the water used for washing the laun-
dry is extremely soft with a conduct-
ivity reading (electrical conductivity)
less than 150 μS/cm. Contact your
local water authority for the conduct-
ivity level of your mains water supply.
Selection
- Normal (factory default setting)
- (only for regions with
Low <150ms
very soft water)

Consumption data

You can view information about the
energy consumption of your tumble
dryer with the  sensor. Various in-
formation can be shown in the display.
Options
- Estim. + Consump.
– Indicates the estimated energy
consumption before the pro-
gramme starts
– Indicates the energy consumption
once the programme starts
- Estimate
Only indicates the estimated energy
consumption before the programme
starts
When this option is activated,
sumption is no longer shown in the
display.
104
(factory default)
Con-

Consumption

You can display the total consump-
tion.
Selection
-
Previous programme
Displays energy consumption in the
last programme run
- Total consumption
Displays the total consumption to
date
- Reset function
Deletes the total consumption to date