Programmable functions
Keypad tone
With this setting, you can activate/de-
activate a signal tone that will sound
each time a sensor is touched.
Options
= off
= on (default setting)
In the case of a selection that is not al-
lowed, a negative signal tone sounds.
70
Lock code
The lock code prevents your dryer be-
ing used without your knowledge.
When the code has been activated, you
have to enter a code after switching the
dryer on. Otherwise the dryer cannot be
operated.
Options
= Off (factory default)
= On
If option has been selected, after
switching on you will have to enter the
code before you can operate the dryer.
To use the dryer when the code is ac-
tivated
After the dryer is switched on, will
flash in the time display.
The code is and cannot be altered.
Touch the sensor until a flashes
in the first position.
Confirm with the Start/Stop sensor.
Enter the two other numbers in the
same way.
The dryer is ready for use after has
been entered and confirmed.
Conductivity
This programmable function
must only be set if the residual mois-
ture reading in your laundry is incor-
rect due to extremely soft water.
Options