Advertisement
THEINFORMATIONMODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information
mode also
allows you to switch the console from miles per hour to
kilometers per hour.
To select the information mode, hold down the
START/STOP
button while inserting the key into the
console. When the information mode is selected, the
following information will be shown:
•
Ii 121
display will show the total
|
number of miles that the
|
walking belt has moved.
OtSTANCE LAPS
The TIME/MIN-MILE
display
will show the total number of
hours the treadmill has been
used.
II 311
TIME
MIN/MILE
(kin)
IMPORTANT:
The CALSJ
FAT CALSJPULSE
display
should be blank. If a "d" ap-
pears in the display, the con-
sole is in the "demo" mode.
This mode is intended to be
used only when a treadmill is
displayed in a store. When
the console is in the demo
mode, the power cord can be
plugged in, the key can be re-
moved from the console, and
the displays and indicators on
the console will automatically
V EKG_-PULSE
1
l
.)
CALORIES
FAT CALS.
uEKG2
PULSE
CALORIES
FAT CALS.
light in a preset sequence, although the buttons on the
console will not operate. If a "d" appears in the
CALSJFAT
OALSJ PULSE display when the infor-
mation mode is selected, press the SPEED _7 button
so the CALSJ FAT CALSJPULSE
display is blank.
To exit the information mode, remove the key from the
console.
An "E," for english miles, or
an =M," for metric kilometers,
will appear in the SPEED dis-
play. Press the SPEED A but-
ton to change the unit of mea-
surement.
Advertisement
