Page 2
We appreciate your confidence by your selection of our product. It is TeachLogic’s intent to uphold that confidence by providing factory assistance and dealer support. We hope you will take the time to view this manual to familiarize yourself with the product operation and features.
Page 3
Read Instructions All safety and operation instructions should be read before operating this TeachLogic product. Retain Instructions Safety and operating instructions should be kept for future reference. Water & Moisture certifications This product should not be operated near water.
a brief word about infrared Infrared is a light ray that is below the visible spectrum, just like the sound spectrum extends beyond your hearing ability. An example of infrared transmission is the remote control for your TV set. When a button is pressed, a beam of infrared light is emitted by a Light Emitting Diode (LED) from the IR transmission remote control.
Quantum II owner’s manual product description The Quantum II is an infrared wireless microphone sound system. It is the nucleus of the classroom sound field system which provides optimum voice reinforcement. The addition of a Quantum II sound system will transform your classroom into a totally hands free, voice re-enforcement system, resulting in reduced voice fatigue, enhanced student listening and...
assembly and installation Mounting the Quantum II on the wall, please review the following guidelines. • Selecting the most appropriate location for the Quantum can be the most challenging. Every room is a little different, but in general the most functional location is installing it on the front wall off to one side or the other approximately from either side wall.
Page 8
Quantum II owner’s manual quantum controls features 1. Threaded insert for wall mount bracket. 2. External sensor inputs. 3. Internal sensors. 4. Internal speaker. 5. Power switch & Channel A Control. 6. Power switch & Channel B Control. 7. Power indicator LED. 8.
quantum II controls • Channel A turns power “on/off” (red LED indicator) and adjusts the volume of the IR microphone assigned to it. Normally the Pendant transmitter is assigned to channel A. When the transmitter is turned “on” a green LED will light, indicating that an IR signal is being received from the transmitter.
Quantum II owner’s manual infrared microphone/transmitters The infrared microphone/transmitter is comprised of a microphone input, signal processing circuits and several emitting diodes that transmit the vocal signal to the sensor. The microphone/transmitter can be the Sapphire or Handheld. The rechargeable batteries will provide 6–8 hours of service per charge.
words of caution and limitations of infrared Be sure that the path of transmission between the emitter and sensor is not obstructed. The Sapphire pendant transmitter will not function if placed in pocket. Infrared will not work outdoors in sunlight. Dark surfaces will not reflect infrared well and can limit distance of transmission.
Quantum II owner’s manual BRC-60 drop-in battery charger This stylish desktop drop-in charging station makes it convenient and easy to recharge both Sapphire Pendant and Handheld Microphones. Charge one IRH-35 handheld transmitter and up to two IRT-60 Sapphire transmitters simultaneously. Charging indicator lights illuminate Red when charging, and Green when fully charged.
installation of ICS-55 ceiling sensor The ideal location for the ceiling sensor is in the center of the ceiling. This will provide a clear signal path for the IR transmission from the transmitter to the dome sensor without obstruction. In addition, you will have 360º coverage and will minimize the transmission distance for more reliable performance.
Quantum II owner’s manual operation of wireless microphone Now that the system is installed and connected, we are ready to turn the system “ON” and test its performance. The testing will be done using an IR transmitter (Sapphire or Handheld) to confirm good connectivity and quality audio.
troubleshooting Problem Solution System is turned • Verify AC power; the Blue “on” but there is no LED lights when turned sound “on” Check if system has • been unplugged Check circuit breaker • Call maintenance for • assistance System has power but no sound •...
Sapphire transmitter (IRT-55) specs. Transmitting Diodes Operating Range 1,600 Ft ². 60 Ft. Line of Sight Battery Discharge Indicator Blue Full Purple Medium Flashing Red Very Low Battery Battery Used Lithium-ion (3.7V / 620mAh) Battery Life Approx. 8-9 Hrs/Charge External Power Charger DC +5V, Micro USB Connector Transmission Angle Conical...
Quantum II owner’s manual five year limited warranty TeachLogic IR products are guaranteed to be free of defects in workmanship or material for a period of five (5) years from date of original purchase, subject to the following conditions: 1. Warranty excludes defects caused by normal use and wear, any abuse, or failure to use the product in accordance per instructions.
Page 19
notes Date of Purchase: Model Number: Serial Number: Notes:...
Page 20
1688 Ord Way Oceanside, CA 92056 0018 • • • sales@teachlogic.com 1283 • • • 3/1/18 www.teachlogic.com...
Need help?
Do you have a question about the IRQ-3120 and is the answer not in the manual?
Questions and answers