TeachLogic Forum IMA-240 Quick Start Manual

Quick Start Guide -
Getting to Know Your Sound System
Make note of the location of the speakers and ceiling sensor in your classroom. Ensure that you have unpacked and charged your battery-powered
microphones. Keep this guide handy for future reference.
a a a
.
STEP 1. USING THE AMPLIFIER
. Power & Status Indicator
• Red: OFF
• Blue: ON and activated
• Amber: STANDBY
. Mic Channels/Volume Controls
• Green light: Microphone on and connected to
channel
• No light: Microphone is not on; and/or sensor is not plugged
in; and/or sensor is not receiving mic signal
3. Input Volume Controls
• Controls volume of connected external
devices
STEP 2. USING THE SAPPHIRE
1. Power button and status indicator
• Solid Red: OFF
• Solid Blue: ON
• Solid Purple: External devices quieted
2. Mute microphone: Briefly press power button once (flashing blue).
Unmute microphone: Briefly press power button again (solid blue).
3. Aux Input: Connects devices (like music player) to microphone.
4. Priority Switch: Changes volume of devices plugged into amp inputs
• To increase/decrease volume level: Slide button up or down
• To immediately quiet volume level of external device: Push button once
• To resume volume level of external device: Push button again
5. Gain Switch
• There are 3 levels to adjust your microphone volume: Normal | -3 dB | -6 dB
• You may increase/reduce the volume to accommodate changes in room noise.
•
6. USB Charge Port (found on the bottom of the mic)
Forum
(IMA-240)
TM
v .
1 2
4. Input Jack and Volume Control
• Connects additional external devices to the system (ex. iPhone or mp3 player)
5. Output Volume Control and Output Jack
• Connects devices for recording lessons
• Use one input + one output to connect to computer for video conferencing
PENDANT MICROPHONE
TM
a a a a
3
1
2
. a
4 5
3
5
4
6
(1)