Table of Contents
Advertisement
en Steam
Notes
¡ To achieve good cooking results, do not delay the
time once the operation has already started.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ An operating mode and temperature or level have
been set.
¡ A cooking time is set.
Press
"End time".
1.
To set the time, press the hour display or the minute
2.
display.
a The selected value is marked in blue.
Use the setting ring to delay the time.
3.
If required, use
to reset the setting value.
Press
to start the operation.
4.
a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
5.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Changing the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
Press the end time
1.
Use the setting ring to change the end time.
2.
a The change is applied.
Cancelling the end time
You can delete the set end time at any time.
Press the end time
1.
2.
Use
to reset the end time.
Steam
11 Steam
Food can be cooked particularly gently using steam.
You can use the special types of steam heating, or use
steam assistance with certain types of heating.
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the tem-
perature.
Open the appliance door carefully.
▶
Keep children at a safe distance.
▶
11.1 Before using the steam function
Before using the steam function each time, make sure
that your appliance is supplied with sufficient water.
16
to switch the ap-
.
.
Note: For operating modes that always require a
cooking time, the appliance resets the time at which
the cooking time ends to the next possible time.
a The change is applied.
10.3 Setting the timer
The timer runs independently during the operation. You
can set the timer for up to 24 hours. The timer has its
own signal so that you can tell whether it is the timer or
a cooking time that has elapsed.
Press
in the status display.
1.
Press .
2.
3.
To set the timer, press the relevant time value on
the display, e.g. minute display "m" or second dis-
play "s".
a The selected value is marked in blue.
Set the timer using the setting ring.
4.
If required, use
to reset the setting value.
To start the timer, press "Start"
5.
a The timer counts down.
a The timer remains visible on the display if the appli-
ance is switched off.
a When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status display.
a Once the timer has elapsed, a signal sounds. A no-
tification appears on the display confirming that the
timer has finished.
Changing the timer
You can change the timer at any time.
If the timer is running in the background, use
1.
select the timer beforehand.
Press .
2.
Change the timer using the setting ring.
3.
Press
to confirm.
4.
Cancelling the timer
You can cancel the timer at any time.
If the timer is running in the background, use
1.
select the timer beforehand.
Press .
2.
Reset the timer using
3.
Press
to confirm.
4.
Filling the water tank
WARNING ‒ Risk of fire!
Due to the hot surfaces, vapours from flammable li-
quids may catch fire in the cooking compartment (ex-
plosion). The appliance door may spring open. Hot
steam and jets of flame may escape.
Do not pour flammable liquids (e.g. alcoholic drinks)
▶
into the water tank.
Only fill the water tank with water or with the descal-
▶
ing solution we have recommended.
on the display.
.
to
to
Advertisement
Table of Contents
