Table of Contents
Advertisement
Security Function Ver. 1.01 May 2016
NOTE
• More than one firmware data with a single model or multiple models can be stored
in the USB memory.
In this case, copy the firmware data to the USB memory according to the following
procedures.
1. Make the folder named "FWSelect" (case-sensitive) to the root directory of the
USB memory.
2. Make a folder with any folder name (one byte alphameric characters, maximum
40 characters) under "FWSelect" folder, and store the firmware data to the
folder.
3. Turn OFF the main power switch.
4. Connect the USB memory containing the firmware into the USB port on the right side
of the operation panel.
NOTE
• USB memory must be connected with the main power switch off.
5. Turn the main power switch ON while pressing the Stop key.
38
10. Firmware rewriting
A797S1E019DA
A797S1E020DA
Advertisement
Table of Contents
