Konica Minolta bizhub C228DN Service Manual page 22

Security Function Ver. 1.01 May 2016
Function Name
Print without Authentication
• To allow or restrict printing
which user and account are not
specified.
User Box Administrator Setting
• To set whether to allow or
restrict the Box Administrator to
use the system.
SSL/TLS
• To set whether to encrypt
access by SSL/TLS.
SSL Encryption Strength
• To set the SSL encryption
strength for the SSL encryption
communication.
FTP Server
• To set whether to use FTP
server or not.
Print Data Capture
• To set whether to allow or
restrict capturing the Print Job
Data.
Network Setting Clear
• To clear the network setting
through PageScope Web Con-
nection.
Registering and Changing
Address by the user
(Address Book and Program)
Initialize (Network Settings)
• To clear the network related
settings.
Image Log Transfer Settings
• Specifies whether to transfer
the input or output image data
to the server using whenever
MFP inputs or outputs image
data.
Counter Remote Control
• Specify whether to allow acqui-
sition of counter information
managed on this machine
when a remote diagnosis sys-
tem is used.
When Enhanced Security mode is set to
Default Setting
Restrict Restrict (not to be changed)
Restrict Restrict (not to be changed)
OFF Administrator mode and User mode
(not to be changed)
AES-256, AES/3DES
3DES-168, (not to be changed to one containing
RC4-128,DES-56, strength lower than AES/3DES)
RC4-40
ON OFF (not to be changed)
Allow Restrict (not to be changed)
Enabled Restrict
Allow Restrict (not to be changed)
Enabled Restrict (not to be changed)
OFF OFF (not to be changed)
Restrict Restrict (not to be changed)
18
7. Enhancing the security function
[ON]