Table of Contents
Advertisement
16.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Spin Speed and, at the
2.
same time, turn the programme
selector to position 2.
The display shows the current
a
value.
Set the programme selector to the
3.
required position.
→ "Overview of basic settings",
Page 36
To change the value, press -
4.
Ready in +.
To save the changes, switch off
5.
the appliance.
Cleaning and servicing en
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Drum clean programme
▶
without laundry and with a cleaning
agent for caring for the inside of
the appliance
→ "Accessories", Page 29 or with
washing powder that contains
bleach.
17.2 Cleaning the detergent
drawer
Pull out the detergent drawer.
1.
37
Advertisement
Table of Contents
