Advertisement
Machine Translated by Google
Changing the output method of rear speaker terminals and RCA terminals
Changing the rear speaker terminal
output
method Change the rear speaker output
method according to the type of speaker
connected to the rear speaker output.
ÿÿWhen connecting full-range
speakersÿÿÿSet R-SP:FUL.
ÿ When connecting to a subwoofer
ÿ ÿ Set R-SP: S/W.
By switching the setting to "R-SP:S/W", you
can connect a subwoofer directly to the rear
speaker terminals.
Display the initial
1
settings screen
2
Press FUNCTION
Select
R-SP .
3
Press a /
To select FUL: press a
When selecting S/W: Press b
4
Press BAND
The power returns to the OFF state.
(ÿpage 62)
b
Selecting the signal output from the
RCA external
output You can connect an external amplifier
to the RCA external output terminal of this unit
and use full-range speakers or a
subwoofer. • Select the signal output from the
RCA external output terminal according to the
speakers you connect.
ÿÿWhen connecting a
subwooferÿÿÿSet P/O: S/W.
ÿÿWhen a full-range speaker is
connectedÿÿÿP/O: Set to FUL.
Note
•When the rear speaker output terminal is set
to "R-SP: S/W", the RCA external output
cannot be set.
Set the rear speaker output terminals
1
Set it to "R-SP:FUL"
2
Press c /
To select FUL: press d
When selecting S/W: Press c
3
Press BAND
The power returns to the OFF state.
R-SP
d
65 initial settings
Advertisement
