Advertisement
Machine Translated by Google
Enabling audio from an external device (AUX) to be heard
You can connect external devices such as portable music playback devices, VTRs, and
navigation units to this unit and listen to their audio. You can also enter and display the external
device name.
To connect external devices
There are three ways to connect external devices: ÿ ÿÿ
When using
the included AUX cable or commercially available mini
plug (AUX1) ÿÿWhen using the
separately sold RCA/IP-BUS interface connector (AUX2)
ÿÿWhen using IP-BUS When used
(AUX2)
(When connecting Pioneer products with IP-BUS
output, such as Pioneer navigation units)
Note
• AUX2 can be used with either connection
method ÿ or ÿ. (Both connection methods
cannot be used at the same time.)
ÿ When using the included AUX cable or commercially
available mini
plug Connect to the AUX input terminal (3.5mm) on the
front of the main unit. In this case, the connected device
will be recognized as an AUX1 source.
ÿ When using the separately sold RCA/IP-BUS interconnector
If the external
device to be connected has an RCA output, use the
separately sold RCA/IP-BUS interconnector.
Connect to the IP-BUS input terminal of this unit using
"CD-RB10" or "CD-RB20". The connected external device
will be recognized as an AUX2 source. For details, see
the RCA/IP-BUS interconnector manual.
ÿ When using IP-BUS (when connecting a Pioneer navigation
unit, etc.) Connect to the IP-BUS input of this unit
using a separately sold IP-BUS cable (e.g. "CD-IP600").
To do. The connected external device will be recognized
as AUX2. If a navigation unit is connected, only audio will
be output.
Turn on external device settings
Display the initial
1
settings screen
2
Press FUNCTION
Select
AUX1
or
3
Press a
The external device setting will
be turned on. Press b to turn it off.
4
Press BAND
The power returns to the OFF state.
Enter/display the name of the external device
1
Press and hold SOURCE
Set the source to AUX1 or AUX2
(ÿpage 22).
2
Press and hold FUNCTION
Switches to TitleInput.
Enter the name of
3
the external device using
the same steps as steps 3 to 5 for
entering the CD title (ÿpage 40).
The name you entered will be displayed
instead of AUX1 or AUX2.
4
Press BAND
Return to the normal playback screen
for AUX1 or AUX2.
AUX1 / AUX2
(ÿpage 62)
AUX2 .
Initial setting
6
Advertisement
