Advertisement
Machine Translated by Google
Switching
functions with AUDIO
Set the sound adjustment function after
switching with AUDIO.
1
Press AUDIO
Each time you press the button, the function
changes in the following order.
fƒ†‡—
Adjusting the volume balance
f'Ī
(• page 49)
Simple equalizer adjustment
gNeq adjN
Detailed equalizer adjustment
l"š†
(• page 51)
Loudness ON/OFF
sš„ wN
Subwoofer ON/OFF and
phase switching
XP h
(Page 52)
Adjusting the subwoofer
bƒ˜˜
(• page 52) Bass
booster level adjustment
hpf
(Page 53) High-
pass filter ON/OFF and cutoff
frequency switching
sla
(Page 53) Source
level adjuster setting
Useful to know
BAND to return to the normal playback screen. It will
also return automatically if no operations are
performed for approximately 30 seconds.
Note
•
"Subwoofer ON/OFF and phase switching" and
"Subwoofer adjustment" are switched to "Changing
the output method of rear speaker terminals and
RCA terminals" (ÿPage 65) in the default settings. )
only when SW is selected.
8 tone adjustment
(• page 48)
(Page 50)
(• page 51)
•
Press
Adjusting the front/
back/left/right volume balance
You can adjust the volume balance between the
front, rear, left, and right speakers. Set the balance
so that it sounds more natural.
1
Press AUDIO
Select
FAD/BAL
2
Press a /
The front and rear balance can be
adjusted. To strengthen the front:
Press a. To strengthen the rear:
Press b. The adjustable range is F15 to R15.
3
Press c /
The left and right balance can be
adjusted. To strengthen the right
side: Press d. To strengthen the
left side: Press c. The adjustable range is L15 to R15
4
Press BAND
Return to the normal screen.
Fader
(ÿpage 48).
b
d
Advertisement
