Table of Contents
Advertisement
Operating the extractor hood
Switching off:
There are 2 different methods of switching
off the appliance whether in manual or
automatic mode.
Switching off directly:
L
Press the
button.
Important: All fan functions are switched
off.
Switching off appliance with fan run-on:
Insert filter drawer all the way. The fans
operate in the last switched-on stage for
around another 10 minutes and then switch
off.
❑ If the intensive setting is switched on
when the filter drawer is inserted, the
intensive setting automatically switches
back during run-on.
❑ If intermittent ventilation is switched on, it
continues operating normally following
run-on.
Light
❑ The light can be used at any time, even
when the appliance has been switched
off.
Switching on/off: Press the
Adjusting the brightness:
a
❑ Hold down the
button until the
desired brightness is obtained.
Special functions
Switching on the light automatically, e.g.
via a timer:
❑ Fan and light must be switched off.
Switching on:
Simultaneously press the
buttons.
❑ After approx. 3 seconds the light
Switching off:
Repeat the process with the light switched
on.
❑ After approx. 3 seconds the light
Adjusting the sensitivity of the sensor
control:
1. Press and hold down the automatic
2. To display the current sensitivity, press
3. You can now change the sensitivity of
a
button.
❑ Factory setting:
❑ Lowest setting:
❑ Highest setting:
switches on to acknowledge the setting.
switches off to acknowledge the setting.
button.
+
–
the
or
button.
the sensor control by pressing the
–
button.
@
.
{
.
Ö
.
a
and
L
+
or
23
Advertisement
Table of Contents
