Table of Contents
Advertisement
Important notes
The Scan Monitor one output: ECG for Atrial Fibrillation
The device conforms to IP22 requirements.
The Scan Monitor is intended for use in adults (22 years or older in the U.S.) and with no restrictions on weight.
The screen of the watch will display the percentage of charge when it is plugged.
Use a power cord that matches the voltage of the power outlet, which has been approved and complies with the
safety standard of your particular country.
The patient is an intended operator of the watch and Scan Monitor feature.
The expected service life for Scan Monitor and its accessories is 2 years.
When in need of assistance on using, maintaining or to report unexpected events please contact the manufacturer
for further information (please see the last page of this leaflet).
No service or repairs should be performed on the Scan Monitor hardware other than the maintenance listed in
this leaflet.
Inspect sensors for warping, surface damage or corrosion and check for any other form of damage.
Any serious incident that has occurred in relation to the device should be reported to the manufacturer.
Please note that the device has not been clinically validated for heart rates higher than 140 bpm.
Exposing the device to prolonged lint, dust or sunlight might reduce its life or damage it. A damaged electrode or
sensor may lead to incorrect measurements.
Advertisement
Table of Contents
