LG R5T-AUTO Owner's Manual page 17

1) With the water tank in an upright position,
attach a paper towel or a cloth to the outlet
and remove remaining water.
2) Remove as much water from the water tank as
possible, tilt the water tank towards the water
tank stopper so as to collect the water, and
then dry it by laying it upside down on a paper
towel or a cloth.
CAUTION
• Do not use the mopping mode on any carpet.
• When the robot cleaner is being charged or idle,
please remove the mop holder.
• In order to achieve better mopping results, it is
recommended to sweep your floor three times
with the robot cleaner before installing the mop
holder.
• To avoid damaging your wood floor, please
make sure to take out the mop holder
immediately after floor mopping is complete. Or
install the home station onto the Floor Protector
Plate (optional).
• When mopping is paused or finished, the robot
cleaner will automatically cut off the water to the
mop pad. However, the mop remains wet and
should not be left attached as it can case odors.
Restarting the System
In standby mode, press and hold the home button
for 15 seconds to reset the system. After resetting
the system, the robot cleaner will lose the original
settings including the map and do not clean areas.
OPERATION
17