Error Codes; Usage Counter - Brandt BF3424CW Instruction Manual

ERROR CODES

If there is a malfunction the dishwasher will display an error code. The following table
shows possible error codes and their causes.
Codes
E1
E3
E4
E8
Ed
WARNING
If there is an error code that cannot be solved, please request professional
assistance.

USAGE COUNTER

When the power cord is connected, but the dishwasher is not turned on, close the door,
press and hold the Delay button for 5 seconds, the dishwasher display will show the
usage count.
for 5 Sec.
Example:
632: Show “000” for two seconds, then show “632” for two seconds, at last it will be off.
9080: Show “009” for two seconds, then show “080” for two seconds, at last it will be off.
Meanings
Longer inlet time.
Not reaching required
temperature.
Overflow.
Failure of orientation
of distributary valve.
Failure of communication
between main circuit board
with display circuit board.
for 632
2 Sec.
Possible Causes
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Open circuit or break of distributary valve.
Open circuit or break wiring for the
communication.
+ for 9080
2 Sec.
18
+