Saving Energy; Starting A Program; Changing The Program Mid-Cycle - Brandt BF3424CW Instruction Manual

Saving Energy

1. Pre-rinsing of tableware items leads to increased water and energy consumption
and is not recommended.
2. Washing tableware in a household dishwasher usually consumes less energy and
water in the use phase than hand dishwashing when the household dishwasher is
used according to the instructions.
Starting A
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.

Changing The Program Mid-cycle

A program can only be changed if it has been running only for a short period of time,
otherwise the detergent may have already been released or the wash water with
detergent has already been drained. If this is the case, the dishwasher needs to be
reset and the detergent dispenser must be refilled.
instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press Program button more than three seconds the machine will be in
program selection mode
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, the dishwasher will continued to run.
Program
.
3 sec
16
To reset the dishwasher, follow the