Honda CRF1100AL 2019 Owner's Manual page 210

Starting the Engine
CRF1100AL/AL2/AL4
Start your engine using the following procedure,
regardless of whether the engine is cold or warm.
NOTICE
• If the engine does not start within 5 seconds, turn
the ignition switch to the
10 seconds before trying to start the engine again to
recover battery voltage.
• Extended fast idling and revving the engine can
damage the engine, and the exhaust system.
• Snapping the throttle or fast idling for more than about
5 minutes may cause exhaust pipe discolouration.
• The engine will not start if the throttle is fully open.
206
(Off) position and wait
Make sure the engine stop switch is in the
a
(Run) position.
Turn the ignition switch to the (On)
b
position.
Shift the transmission to Neutral (
c
indicator come on). Alternatively, pull in the
clutch lever to start your vehicle with the
transmission in gear so long as the side
stand is raised.
Press the
d START
completely closed.
If the engine does not start:
Open the throttle fully and press the
a
button for 5 seconds.
Repeat the normal starting procedure.
b
If the engine starts, open the throttle slightly
c
if idling is unstable.
If the engine does not start, wait 10 seconds
d
before trying steps a & b again.
#
If Engine Will Not Start
N
button with the throttle
START
(P.301)