1060 Wireless-Wan Card (For Selected Models); 1070 M.2 Solid-State Drive - Lenovo X13 Yoga Gen 3 Hardware Maintenance Manual

1060 Wireless-WAN card (for selected models)

For access, remove these FRUs in order:
• "1010 Lenovo Integrated Pen (for selected models)" on page 58
• "1030 Base cover assembly" on page 59
Removal steps of the wireless-WAN card
Note: A Mylar film might cover the wireless WAN card. To access the wireless WAN card, peel off the film
first.
Step Screw (quantity)
2
M2 × L2 mm, large flat (1)
When installing: Connect the cables with different colors to the corresponding connectors on the card: the
orange cable to the connector labeled ORANGE, and the blue cable to the connector labeled BLUE.

1070 M.2 solid-state drive

For access, remove these FRUs in order:
• "1010 Lenovo Integrated Pen (for selected models)" on page 58
• "1030 Base cover assembly" on page 59
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for
frequent changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
62
X13 Yoga Gen 3 Hardware Maintenance Manual
Color Torque
Silver 0.181 Nm
(1.85 kgf-cm)