Table of Contents
Advertisement
5. Remove the fixing screw holding on the handle attachment components using a
3 mm Allen key. Remove the two attachment components.
6. Temperature adjuster can be moved 3 positions in either direction, one position
equals 1˚C. Rotate adjuster anti-clockwise to increase temperature and rotate
clockwise to decrease temperature.
7. Replace the attachment components and make sure the fixing screw is fully
tightened. Refit the handle.
Cleaning
Many household and commercial cleaners, including hand and surface cleaning
wipes contain abrasives and chemical substances that can damage plastics, plating
and printing and should not be used. These finishes should be cleaned with a mild
washing up detergent or soap solution, and then wiped dry using a soft cloth.
Important! The showerhead must be de scaled regularly, keeping the showerhead
clean and free from lime scale will ensure that your shower and showerhead continue
to perform to their maximum. A blocked showerhead can restrict the flow rate and
may cause damage to your shower.
1320703-W2-B
Location Pin
Factory Setting
Maximum Temperature Position
14
Location Pin
Advertisement
Table of Contents
