Kohler rada VZ1 10 Installation And User Manual page 12

Install the olives and the connectors.
Tighten finger tight and then another
1/4 to 1/2 turn.
Note: Supplied olives must be
used. Ensure pipe manufacturer's
instructions are followed (i.e. use
pipe inserts for plastic pipe).
Install the temperature handle.
Note: Fit the handles. See Instructions on the box in which the handles
are packed.
1320703-W2-B
Turn on the water supply and flush the
pipework.
Attach the bar valve to the wall fixings.
Note: Make sure that the sealing
washer/filter is installed in each
inlet.
Install the flow handle.
12