Error Status - Red Bull Racing TURBO User Manual

Error status

When one of these error codes appear on the display, kindly contact your retailer or after-sale-service for immediate assistance.
Remarks: When the above error occurs, the rear tail lamp will flash at 10Hz high frequency. The motor will not operate; therefore,
the motor cannot be seen as damage when it does not operate when error occurs.
Code
Battery temperature is high. Battery is
P0
nearly out of power.
P1 Controller temperature is high.
Communication failure between display
E0
and controller.
E1 Throttle failure.
E2 Brake failure.
E3 Motor hall.
E4 Motor phase.
E5 Controller.
Meaning
It usually appears during use, meaning the battery is low.
Turn off the e-scooter for 10 minutes waiting for normal
temperature. Charge the battery.
Turn off the e-scooter for 5 minutes waiting for normal
temperature.
Check display, controller, and their connection cables. After-
sales service is required.
The throttle signal does not enter the speedometer. After-
sales service is required.
It is because the throttler signal does not enter the
speedometer. After-sales service is required
Check motor cable and controller.
Check motor phase cable and controller. After-sales service
is required.
Check the controller. After-sales service is required.
Description
10