Related Manuals for Charnwood UDH001
Summary of Contents for Charnwood UDH001
- Page 1 UNIVERSAL DUST HOOD HOLDER FOR LATHES OWNERS MANUAL MODEL: UDH001 Charnwood Machinery Ltd, Cedar Court, Walker Road, Bardon Hill, Leicestershire, LE67 1TU Tel. 01530 516 926 Fax. 01530 516 929 email: sales@charnwood.net website: www.charnwood.net...
-
Page 2: General Safety Rules
GENERAL SAFETY RULES WARNING: Do not attempt to operate the machine until you have read thoroughly and understood completely all instructions, rules, etc. contained in this manual. Failure to comply may result in accidents involving fire, electric shock, or serious personal injury. Keep this owner's manual and review frequently for continuous safe operation. - Page 3 UDH001 UNIVERSAL DUST HOOD HOLDER FOR LATHES OVERVIEW Lathe Bed Lock Handle Locking Plate Long Arm Short Arm Vertical Bar Dust Hood Clamp Dust Hood Bracket Slide Bracket Locking Handles Setting Up Thread the Dust Hood Clamp through the Dust Hood Bracket and turn the wing nut to feed the clamp in a couple of turns.
- Page 4 Slot the Vertical Bar into the Slide Bracket making sure the end with the flats on is at the bottom. Attach the Short Arm onto the bottom of the Vertical Bar using the Locking Handle and washer. Note: The flats on the vertical bar should fit inside the slot on the short arm.
- Page 5 Attach a suitable dust hood onto the dust hood bracket and hold in place by tightening the dust hood clamp. We recommend the Charnwood DH250 or DH410 dust hood. Note: Set the dust hood bracket at a slight angle so that your dust hose will not foul on the vertical bar.
- Page 6 Dust hood in the horizontal position. The dust hood can also be used in the vertical position by turning the dust hood arm by 90 degrees. Dust hood in the vertical position.
- Page 7 Updated June 2023 Charnwood Machinery Ltd, Cedar Court, Walker Road, Hilltop Industrial Estate, Bardon Hill, Leicestershire, LE67 1TU, England Tel. 01530 516 926 Fax. 01530 516 929 email: sales@charnwood.net website: www.charnwood.net...