for tearing loose fixed loads, dragging of loads as well as diagonal pulling
for pulling against a fixed point without additional safety and/or measuring equipment against exceeding
the nominal load
in potentially explosive atmospheres, unless the equipment has been modified for this purpose and
this is shown on special type plates it carries for this purpose.
in reactor containments
for transporting persons
for holding lifted loads
for scenic use
when persons are under suspended loads
4.2
Design
HADEF Wall-mounted jib cranes are designed to EN 13001 HC2/S1.
Type 340/15
4.3
Function description
Direction of movement: manually slewing
4.4
Important components
Jib
Profile steel beam, with ball bearings
Bracket
Profile steel
Embracing bracket – as option
For installation on to columns and beams
Fixing device – as option
For locking the jib
Slewing end stops – as option
Adjustable slewing end stops
Adjustable locking disc (optional)
For locking the jib in various positions.
Depending on the design of the wall-mounted jib
crane, the locking disc can be mounted on the
upper or lower mounting bracket.
5
Technical data
5.52.734.00.01.00
Illustration 1
Illustration 2
7