Related Manuals for HADEF 320/01
Summary of Contents for HADEF 320/01
- Page 1 Installation, Operating and Maintenance Instructions HADEF Wall-mounted Jib Crane Type 320/01 5.52.732.00.01.05 Rev.05...
-
Page 2: Table Of Contents
Heinrich de Fries GmbH Heinrich de Fries GmbH, Gauss Str. 20, D-40235 Düsseldorf Heinrich De Fries GmbH will be named HADEF in the following text. Original operating- and maintenance instructions in German language. Translation in other languages is made of the German original. -
Page 3: Information
Inspection ..................10 12.1 Periodic checks ......................10 12.2 Inspection intervals ....................... 10 Service ..................... 10 13.1 Slewing bracket ......................10 13.2 Lubricant - Selection ..................... 11 13.3 Lubricant for food industry – Selection (as option*) ........... 11 Trouble ..................... 11 Remedy .................... -
Page 4: Duty Of Care Of The Owner
Failure to follow the instructions of this manual can lead to unpredictable hazards. For any resulting damage or personal injury, HADEF assumes no liability. The unit was designed and built following a risk analysis and careful selection of the harmonized standards that are to be complied with, as well as other technical specifications. -
Page 5: Appropriate Use
Appropriate use The permitted safe working load of the devices must not be exceeded! An exception can be made during the load test before initial operation, carried out by a licensed qualified person. The permissible ambient temperature during operation of manual driven devices is -20 ° C / + 50 ° C and at all power driven devices -20 °... -
Page 6: Transport And Storage
The lifting tackle or the load must be securely attached to the hook and be seated at the bottom of the hook. The safety catch of hooks must be closed. When charged, the housing may not be in contact somewhere. Observe separate installation-, operation and maintenance instruction of hoists. -
Page 7: Design
Design HADEF Wall-mounted jib cranes are designed to EN 13001 HC2/S1. Type 320/01 Illustration 1 Function description Direction of movement: manually slewing Important components Profile steel beam, with ball bearings Bracket Profile steel Embracing bracket – as option For installation on to columns and beams Fixing device –... -
Page 8: Wall Fastening
Wall fastening prepare fixing holes in the wall put the wall bracket (1) onto the wall Fix it with screws, discs and nuts (2) (on site) Put through axle (4) Adjust with water-level Tighten screws (2) Remove axle (4) again Push the jib with ball bearings (3) into the wall bracket Put through the axle (4) from the bottom or... -
Page 9: Commissioning
Commissioning General Should the unit be used in Germany: Please observe the validated, national accident prevention regulations. For other countries: Inspections as above. Please observe the national rules and regulations and the instructions in this manual! NOTICE! Hoists up to 1000 kg capacity and without motor-driven trolleys of hoisting unit must be tested by a “qualified person”... -
Page 10: Maintenance
Maintenance 11.1 General All monitoring, servicing and maintenance operations are to ensure correct functioning of the equipment; they must be effected with utmost care. Only “qualified persons” may do this work. Servicing and maintenance work must only be done when the hoist is not loaded. Records must be kept of all test results and measures taken. - Page 11 13.2 Lubricant - Selection FUCHS SHELL ESSO MOBIL TOTAL CASTROL KLÜBER Renolit FEP 2 Alvania EP 2 Unirex EP 2 Mobilux EP 2 MULTIS EP2 Stabylan 5006 Optimol Viscoleb 1500 Klüberoil 4UH 1-1500 Wolfracoat 99113 Chain lubricant OKS 451 13.3 Lubricant for food industry –...
- Page 12 16.1 Temporary decommissioning Measures are as above. Also read the chapter “Transport and storage”. 16.2 Final decommissioning/disposal Measures are as above. After disassembly, ensure that the disposal of the equipment and any materials it contains is carried out in accordance with environmental regulations. Additional documents 17.1 Operating instructions for cranes...