Table of Contents
Advertisement
4.2
Design
HADEF Wall-mounted jib cranes are designed to EN 13001 HC2/S1.
Type 320/01
4.3
Function description
Direction of movement: manually slewing
4.4
Important components
Jib
Profile steel beam, with ball bearings
Bracket
Profile steel
Embracing bracket – as option
For installation on to columns and beams
Fixing device – as option
For locking the jib
Slewing end stops – as option
Adjustable slewing end stops
Adjustable locking disc (optional)
For locking the jib in various positions.
Depending on the design of the wall-mounted jib
crane, the locking disc can be mounted on the
upper or lower mounting bracket.
5
Technical data
Technical data depend on the order. They are shown in the order confirmation, in the approval drawing or in
the test book.
6
Installation
Assembly depends on the local environment. The crane must be assembles stress-free. The runway must
be perfect.
Operating regulations for cranes in accordance with the validated accident prevention regulations
An end stop is provided at the end of jib.
Generally, additional lifting gear (e.g. fork lift, lifting platforms) will be required for the assembly.These must
take the weight of the devices safely.
5.52.732.00.01.05
Illustration 1
Illustration 2
7
Advertisement
Table of Contents
