Specification; Dimensions And Connections - STIEBEL ELTRON MEK-K Operation And Installation Manual

INSTALLATION

Specification

If the flow rate is too low
f Unscrew the cap from the butterfly valve.
f Using a screwdriver, turn the butterfly valve adjusting screw
anti-clockwise to increase the flow rate.
f Measure the flow rate again.
f Adjust the flow rate with the butterfly valve until the meas-
ured flow rate corresponds at most to the maximum permis-
sible flow rate.
f Screw the cap onto the butterfly valve.
www.stiebel-eltron.com
8. Specification
8.1

Dimensions and connections

MEK-K
70(95)
198
306
100
G1/2
193
MEK-K | MED-D | 25