Inter-m AOE-212N Operation Manual page 9

MAIN
6000 6000
SERIES SERIES
※ Example Connect the device to be controlled to the contact point terminal of AOE-212N from point
'A', and insert the control signal from the main building, then device of point 'A' can be controlled.
8. RS-232C/RS-422 communication terminal
Display the signals inserted in RS-232C or RS-422 terminal on the rear of AOE-212N on the RS-232C and
RS-422 terminals of AOE-212N. For example, if signals, 'A B C D' are inserted in the transmitter, signals
'A B C D' will be displayed on the receiver.
MAIN
RS-232C communication: No. 1 pin (Rx), No. 3 pin (Tx), No. 5 pin (GND)
RS-422 communication: Tx+, Tx-, Rx+, Rx-
※ Transmit and receive data communication using RS-232C/RS-422 ports supports 1:1
※ Example: Connect the device to be controlled to the RS-232/RS-422 terminal of AOE-212 from
point 'A', and insert the control signal from the main building, then device of point 'A' can be controlled.
9. Network terminal
It is network connecting terminal (RJ-45) and supports 10/100 Base-Tx.
AUDIO OVER ETHERNET
POINT
6000 6000
SERIES SERIES
POINT
AOE-212N 7