AUDIO OVER ETHERNET
Equipment setting using AOE-212N internal CGI server
Equipment setting using AOE-212N internal CGI server
It provides the web-page to check the status and control of AOE-212N.
※ Contents of this Operation Manual are subjected to be changed by revision of firmware. please refer to
"www.inter-m.com/en" for latest one.
※ AOE-212N uses HTML5 and Websocket standards, therefore, some browsers may not work. Supported
browsers are as follows:
Support
Unsupported
Supported
※ AOE-212N web page is optimized for Google Chrome browser.
Ⅰ. Accessing AOE-212N Web-page
Ⅰ. 1 Access to the web-page by using internet browser (Explorer, Chrome, FireFox, etc.)
Ⅰ. 2 Insert the IP address displayed on the front LCD of AOE-212N.
If it is connected normally, user verification window will pop-up..
User verification is required to access the AOE-212N web-page.
Default value for factory setting is as below.
Administrator
User
※ Please be sure to change the password after the connection you use.
※ When properly connected, AOE-212N Web page will be displayed in the browser.
8
AOE-212N
Internet Explorer 8, Internet Explorer 9
Opera, Opera Mini
Android 4.3(Jelly Bean) or less browser
Internet Explorer 10 or higher browser
Chrome, Chrome mobile
Safari, Safari mobile
FireFox, FireFox mobile
Android 4.4(KitKat) or higher browser
ID
PASSWORD
admin
1
user
1
Support Status
REMARKS
All functions admin configuration
All functions except system management