Inter-m AOE-212N Operation Manual page 36

AUDIO OVER ETHERNET
Ⅲ.1.4-4 Contact Closure Client Monitoring
Once the contact client configuration is completed, one can monitor the contact client status as shown above.
Category
Verify the contact
closure status
Start
Stop
Reset
Contact closure
Delay value of contact
closure
34 AOE-212N
Contents
Contact closure status is monitored in real-time.
Runs the Contact Closure Client using the currently stored information.
Stops the Contact Closure Client.
Stop and reset the Contact Closure Client.
Termination of service activity will reset the Contact Closure status.
However, inactivity of service will still maintain Contact Closure status.
The operation is delayed by the specified set time.
Default
On: Blue, Off: Red