Inter-m AOE-212N Operation Manual page 30

AUDIO OVER ETHERNET
Ⅲ.1.3-3 Settings of serial (422) client
Category
Selection of baud rate
Setting of serial transmission
method
Selection of operating
information
Apply
Initialize
28 AOE-212N
Contents
The baud rate indicates the rate at which information is transferred in a
serial communication channel for 1 second.
As one of the communication system, you can refer to a method of
communication in a point-to-point high interactivity.
Half duplex - Provides communication in both directions, but only one
direction at a time (not simultaneously).
Full duplex – Allows communication in both directions, and allows this to
happen simultaneously in a time.
485 mode - Support the serial (485) operating through 422 serial port.
IP address - Connect to the server with the preset IP address to connect
server.
Port - Put the port number related to the server to connect.
After completing the changes to the equipment, press the Apply button to
saves the updated settings.
Reverts to the default setting.
Default
9600
Full duplex
IP: 192.168.1.99
Port: 5456