Inter-m AOE-212N Operation Manual page 28

AUDIO OVER ETHERNET
Ⅲ.1.3 Serial setup (422)
Ⅲ.1.3-1 Settings of serial (422) server
Category
Selection of baud rate
Setting of serial
transmission method
Selection of operating
information
Apply
Initialize
26 AOE-212N
Contents
The baud rate indicates the rate at which information is transferred in a
serial communication channel for 1 second.
It sets as same as the baud rate of relevant device.
As one of the communication system, you can refer to a method of
communication in a point-to-point high interactivity.
Half duplex - Provides communication in both directions, but only one
direction at a time (not simultaneously).
Full duplex - Allows communication in both directions, and allows this to
happen simultaneously in a time.
485 mode - Support the serial (485) operating through 422 serial port.
Port - Select the desired port for servers operating.
It cannot choose the duplicated port.
After completing the changes to the equipment, press the Apply button
to saves the updated settings.
Reverts to the default setting.
Default
9600
Full duplex
5456