Hercules DJCONTROL INPULSE T7 Manual page 65

In Serato DJ Lite and Serato DJ Pro, mode 7
corresponds to Manual Loop mode. This mode lets you
manually enable a loop.
1. To access mode 7 (Manual Loop), simultaneously
press SHIFT and STEMS 3. The STEMS 3 button
flashes.
2. To carry out an action, press a pad.
Possible actions:
Deck 1/2
Pad 1
Pad 2
Pad 3
Pad 4
AUTOLOOP
encoder
First press: sets the in point (IN)
Second press: modifies the in point (IN)
First press: sets the out point (OUT)
Second press: modifies the out point
Enables/disables the loop
Moves the playhead to the start of the
loop and plays the loop (Reloop)
Increases/decreases the length of the
65
Effects
(OUT)
loop