Table of Contents
Advertisement
Clean all accessories after each use and let them dry. Use only a microfibre cloth with warm
water and a mild detergent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.
Accessories
11.2 How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1
Turn off the oven and wait until it is
cold.
Step 2
Pull the front of the shelf support
away from the side wall.
Step 3
Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4
Install the shelf supports in the oppo‐
site sequence.
The retaining pins on the telescopic
runners must point to the front.
11.3 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
Turn off the oven and wait until
it is cold.
Step 1
Turn on the oven.
Option
Pyrolytic cleaning, quick
Before the Pyrolytic Cleaning:
Remove all accessories and remova‐
ble shelf supports.
Step 2
Press:
/ Cleaning.
Cleaning mode
Light cleaning
1
2
CAUTION!
If there are other appliances installed in
the same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Clean the oven floor and the inner door
glass with warm water, a soft cloth and
Select the cleaning mode.
a mild detergent.
Step 3
Duration
1 h
ENGLISH
23
Advertisement
Table of Contents
