Table of Contents
Advertisement
7
PARAMETER MENU
When the device is turned off, long press
and
to move between digits. Confirms PIN by pressing
Table A3 Parameters
Parameter:
E01
Description:
Restore to factory default.
Change to 55 to restore factory default settings.
Available settings:
0~99
Default setting:
53
Parameter:
E02
Description:
Power on state after power failure.
Available settings:
0 - device does not return to previous mode and stays switched off.
1 - device returns to previous mode and stays switched on
2 - device returns to the last mode (Off/Heating/Cooling/Ventilation)
Default setting:
01
Parameter:
E03
Description:
Backlight brightness.
1 - backlight is off on dimmed display after specific time of no key action
2 - low brightness and dimmed display after specific time of no key action
3 - medium brightness and dimmed display after specific time of no key action
4 - high brightness and dimmed display after specific time of no key action
5 - display always on
Available settings:
1 ~5
Default setting:
2
Parameter:
E04
Description:
Beep volume.
1: OFF
2: Low Beep
3: Medium Beep
4: High Beep
5: Standard Beep
Available settings:
1~5
Default setting:
5
Parameter:
E05
Description:
Communicate address.
Available settings:
1~64
Default setting:
01
Parameter:
E06
Description:
Temp. upper limit.
Available settings:
0.0°C~55.0°C
Default setting:
37.0°C
Parameter:
E07
Description:
Temp. lower limit.
Available settings:
0.0°C~55.0°C
Default setting:
05.0°C
M
+
to enter Parameter Menu, input password 5138, changing the digits by pressing
M
or
Advertisement
Table of Contents
