Nice Fan4-Control Instructions And Warnings For Installation And Use page 11

9
ASSOCIATION GROUP
Table A4 Association group
Max
AG Identifier
Node ID
0x01 1
Table A5 Association group
AG
Max
Command Class
Node ID
Identifier
COMMAND_CLASS_THERMOSTAT_ SETPOINT_
V2,THERMOSTAT _ SETPOINT_REPORT _V2
COMMAND_CLASS_THERMOSTAT_ FAN_
MODE,THERMOSTAT_FAN_ MODE_REPORT
0x01 1
COMMAND_CLASS_THERMOSTAT_ FAN_
STATE,THERMOSTAT_FAN_ STATE_REPORT
COMMAND_CLASS_DEVICE_RESET_
LOCALLY,DEVICE_RESET_LOCALLY_ NOTIFICATION
Command Class
COMMAND_CLASS_SENSOR_MULTILEVEL_
VS, SENSOR_M U LTI LEVEL_REPORT _ VS
COMMAND_CLASS_THERMOSTAT_MODE_
V2, THERMOSTAT_MODE_REPORT
COMMAND_CLASS_THERMOSTAT_OPER-
ATING_STATE, THERMOSTAT_OPERATING_
STATE_REPORT
COMMAND_CLASS_THERMOSTAT_SET-
POINT_V2, THERMOSTAT _SETPOINT _RE-
PORT_ V2
COMMAND_CLASS_THERMOSTAT_FAN_
MODE, THERMOSTAT_FAN_MODE_REPORT
COMMAND_CLASS_THERMOSTAT_FAN_
STATE, THERMOSTAT_FAN_STATE_REPORT
COMMAND_CLASS_DEVICE_RESET_LO-
CALLY, DEVICE _RESET_ LOCALLY _ NOTI
FICATION
Trigger Situation
The change between detected temperature and last reported
temperature is greater than the value set by parameter 2.
Device Mode changes
Device Status changes
Set point value changes
Fan mocie changes
Fan status changes
Restore the factory setting
Trigger Situation
Set point value changes
Fan mode changes
Fan status changes
Restore the factory setting