Pelgrim PVD25102N Instructions For Use Manual page 102

OPEN DOOR ALARM
If you only switch off the alarm by touching the A key, the alarm will switch
!
on again after some time because the door is still open.
HIGH TEMPERATURE ALARM
A signal will sound when the temperature in the appliance is too high. Furthermore,
symbol D shown in the display will flash. A high temperature can be caused for
several reasons:
• The door has been opened for too long or too frequently.
• The door does not seal properly.
• Too much fresh food has been put in at the same time.
i
Every time the appliance is switched on again, it takes a while until the
correct temperature is reached. For this reason, the alarm is disabled for the
first 24 hours after the appliance is switched on to prevent the unnecessary
activation of the alarm.
i
When you press the A key for the first time, the alarm will be acknowledged
and turned off. When you press the A key again, it will already work as a
settings adjustment key.
!
When the alarm is not stopped manually and the temperature remains too
high, the signal will sound for the first minutes of every half hour and when
the door is opened.
18
An alarm signal sounds when a door is
open for too long.
Stopping the alarm
1. Close the door.
- The alarm will stop sounding.
Stopping the alarm
1. Touch the A key to stop the alarm.
- The alarm will stop sounding.
- Symbol D shown in the display
continues to flash while the
temperature is still too high.