Pelgrim PVD25102N Instructions For Use Manual page 100

Built-in freezer
Hide thumbs Also See for PVD25102N:
Table of Contents

Advertisement

Available languages

Available languages

SWITCHING THE APPLIANCE ON/OFF
ADJUSTING THE TEMPERATURE IN THE APPLIANCE
i
• The factory default setting is the recommended temperature of –18 °C.
• After the appliance is switched on, it may take several hours for the set
temperature to be reached. Do not place any food into the appliance
before the temperature has dropped to the selected setting.
16
Switching the appliance on: Press the
A key and hold it for 3 seconds.
Switching off the appliance: Again
press the A key and hold it for 3
seconds. The appliance will be off, but
there is still voltage in it as it is still
connected to the power mains.
• Adjust the temperature as desired
using the A key.
• Press the A key (several times) until
the desired temperature indicator
lights up.
• When the A key is pressed for the
fi rst time, the currently set value
or function will start to fl ash. Every
successive time you press the A key,
the settings indicator will move to
the next setting (from right to left, in
a circular manner).
• After three seconds, the setting
will stop fl ashing. Your setting will
be stored and the corresponding
indicator will be continuously lit.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pvd25088l

Table of Contents