Table of Contents
Advertisement
Others
Please confirm before consulting or repairing
Failures
Even if the
button is pressed,
there is no display
The
symbol
flashes during the
measurement
The
mark
flashes during the
measurement
Continuous
inflation
is displayed
The display
disappears
during inflation
Main unit damage
Cause and solution
The
polarities of the batteries are installed
incorrectly.
Battery power is low.
The button pressing time is not sufficient. Please
press it for more than one second.
Irregular pulse during measurement. (P19)
No function of irregular pulse warning.
There may be movements in the body.
After the measurement, when
a re-measurement is taken.
(Please relax for 4~5 mins before measuring)
Even if the arm and body have no movements
during the measurement, the body movement will
be detected when the arm is exerting force. Please
wait until the arm is relaxed before measuring.
Please stop using it, and entrust a sales store to
inspect and repair it.
Battery power is low.
Please prepare new batteries (P10)
The battery has been used up.
Please refer to P10
Please do not repair it yourself, and be sure to
entrust the sales outlet for inspection and repair.
Please refer to P10
Please refer to P10
Troubleshooting
flashes and
25
Advertisement
Table of Contents
