ROOMS TO GO WALDORF 5518-1 Assembly Instructions

*** Caution. Please read all instructions carefully before starting the assembly process. These parts are cumbersome
and heavy. Therefore, two people are recommended in order to prevent personal injury and insure the parts are not
damaged during the assembly.
No.
A
B
Step 1
Place the Table Top (A) upside down on a piece
of cloth or carpet to prevent the finish from
scratching. Attach the Table Leg (B) to each
corner of the Table Top (A) by using Bolt/ Lock
Washer/ Flat Washer (1) and tighten with Allen
Key (2) provided.
Note: Do not tighten all bolts until the table is
fully assembled.
Step 2
Turn the Table to the upright position. Place
the Table on a flat surface. Fully tighten all
Bolts with Open Wrench (7). The table is
assembly completed.
CLEANING INSTRUCTION: Clear with a soft cloth and warm water with a diluted mild detergent.
Follow with a soft cloth and clear water rinse. Then dry thoroughly with a soft cloth.
ASSEMBLY INSTRUCTIONS
SSIO SKU#: 5518-1
SKU#: 42155184
PARTS LIST
Table Top
Table Leg
WALDORF DINING TABLE
WALDORF DINING TABLE
No.
1
2
B
2
A
1
HARDWARE LIST
5
Bolt '' x 60 mm (20 TPI)
16
5
Lock Washer '' x 13 mm
16
5
Flat Washer '' x 19 mm
16
Allen Key 4 mm
B
MADE IN VIETNAM
5518-1
5518-1
A