BMW 4 Coupe Series Manual page 279

For reasons of safety, the system can only be
switched on once. The system will be available
again as soon as the drive-ready state is acti‐
vated and deactivated again.
Observe the information about the intended use
of the vehicle.
Additional information:
For Your Own Safety, refer to page 8.
Adjusting the departure time via
iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Preconditioning/ventilation"
5. "Departure plan"
6. Select the desired departure time.
7. Set the departure time.
8. Select day of the week, if needed.
Activating the departure time via
iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Preconditioning/ventilation"
5. "Departure plan"
6. Activate the desired departure time.
Display
In the instrument cluster:
The engine runs for the purpose
of operating the pre-conditioning.
The vehicle is not ready to drive.
The icon on the automatic climate con‐
trol signals an activated departure time.
The icon flashes while Remote Engine Start
is running.
Online Edition for Part no. 01405A392C9 - VI/21
Climate control
Confirmation signals from the
vehicle
The activation of the system is confirmed by
flashing twice.
The parking lights are switched on as long as the
system is switched on.
CONTROLS
279