BMW 4 Coupe Series Manual page 125

Mounts for the lower LATCH
anchors
General information
The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lbs/30 kg when the child is
restrained by the internal harnesses.
Safety information
Warning
If the LATCH child restraint fixing systems are
not correctly engaged, the protective effect of
the LATCH child restraint fixing system is lim‐
ited. There is a risk of injury or danger to life.
Make sure that the lower mountings are se‐
curely engaged and that the LATCH child re‐
straint fixing system fits securely against the
backrest.
Warning
The attachment points for child restraint sys‐
tems in the vehicle are intended for attaching
child restraint systems only. When other ob‐
jects are mounted, the attachment points can
be damaged. There is a risk of injury or risk of
damage to property. Attach only child restraint
systems at the corresponding attachment
points.
Transporting children safely
Online Edition for Part no. 01405A392C9 - VI/21
Position
Icon Meaning
The corresponding icon shows
the mounts for the lower
LATCH anchors.
Seats equipped with lower
mountings are marked with a
pair, (2), of LATCH symbols.
For vehicles equipped with a
middle seat:
It is not recommended to use
the inner lower mountings of
standard outer LATCH positions
to fasten a child restraint system
on the middle seat. Use the ve‐
hicle safety belt instead for the
middle seat.
Before installing LATCH child
restraint fixing systems
Pull the safety belt away from the area of the
child seat mountings.
Assembly of LATCH child
restraint fixing systems
1. Install child restraint system, see manufactur‐
er's information.
2. Ensure that both LATCH anchors are prop‐
erly engaged.
CONTROLS
125