BMW 4 Coupe Series Manual page 265

Button Function
Maximum cooling.
Seat heating, refer to page 120.
Some of the functions can also be used via
voice, e.g., temperature.
Switching climate control
functions on/off
Turning on
Press one of the following buttons:
▷ Temperature.
▷ Air conditioning.
▷ Maximum cooling.
▷ AUTO program.
▷ Air recirculation mode.
▷ Air flow, manual.
▷ Air distribution, manual.
▷ Defrosting the windshield
Turning off
Complete system:
Press the button until the automatic cli‐
mate control switches off.
Temperature
Principle
The automatic climate control cools or heats to
the configured temperature and then keeps the
temperature constant.
Setting the temperature
Using the button:
Press the upper or lower button side to
set the desired temperature.
Online Edition for Part no. 01405A392C9 - VI/21
Climate control
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver"
6. "Temperature:"
7. Set the desired temperature.
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Air conditioning
Principle
The air in the car's interior will be cooled and de‐
humidified and, depending on the temperature
setting, warmed again.
Functional requirement
The car's interior can only be cooled with the
drive-ready state switched on.
Switch climate control function
on/off
Press the button.
The LED is illuminated when the cli‐
mate control function is switched on.
Depending on the weather, the windshield and
the side windows may fog up briefly when drive-
ready state is switched on.
Air conditioning is switched on automatically with
the AUTO program.
When using the cooling mode, condensation that
will exit below the vehicle.
CONTROLS
265