BMW 4 Coupe Series Manual page 220

CONTROLS
Button Function
Reduce distance.
Switch distance control on/off.
Rocker switch:
Set speed.
Sensors
The system is controlled by the following sen‐
sors:
▷ Cameras behind the windshield.
▷ Front radar sensor.
Additional information:
Sensors of the vehicle, refer to page 37.
Application range
The system is best used on well-constructed
roads.
The minimum speed that can be set is
20 mph/30 km/h.
The maximum speed that can be set is limited
and, e.g., depends on the vehicle and the vehicle
equipment.
The system can also be activated when station‐
ary.
Turning on/off and interrupting
cruise control
With steering and traffic jam
assistant: Assisted Driving Mode
General information
This button is used to switch the config‐
ured function on and off.
The button can be used to set the pri‐
marily used function.
220
Driver assistance systems
Online Edition for Part no. 01405A392C9 - VI/21
Set function
When the system is active, press the
button repeatedly until the desired func‐
tion is selected in the toolbar. The toolbar for As‐
sisted Driving mode is displayed at the bottom of
the instrument cluster.
Icon Function
Cruise control with distance control.
Depending on the equipment version,
cruise control with distance control and
steering and traffic jam assistant.
The selected function is shown in green.
Turning on
With steering and traffic jam assistant:
1. Press the button on the steering
wheel.
2. If necessary, set the cruise control.
Without steering and traffic jam assistant:
Press the button on the steering wheel.
The indicator lights in the instrument cluster light
up and the marking on the speedometer is set to
the current speed.
Cruise control is active. The current speed is
maintained and stored as set speed.
DSC Dynamic Stability Control is switched on, if
necessary.
Turning off
To switch off the system while standing, step on
brake pedal at the same time.
Press the button on the steering wheel: