Table of Contents
Advertisement
1. Introduction and Intended Use
The Medescan Smart BP Monitor enables reliable measurement of systolic
and diastolic blood pressure as well as pulse through the oscillometric
method.
Before using, please read this instruction manual carefully and then keep it
in a safe place.
1.1 Remember...
• Only a health-care professional is qualified to interpret blood pressure
measurements.
• This device is NOT intended to replace regular medical checkups.
• Blood pressure readings obtained by this device should be verified
before prescribing or making adjustments to any medications used to
control hypertension. Under no circumstances should YOU alter the
dosages of any drugs prescribed by your physician.
• This monitor is intended for use by adults only. Consult with a
physician before using this instrument on a child.
•In cases of irregular heartbeat , measurements made with this
instrument should only be evaluated after consultation with a physician.
2
1.2 Warnings and Precautions
Warning:
The use of other accessories other than those specified or
provided by the equipment manufacturer may cause
electromagnetic radiation to increase or decrease electromag-
netic immunity resulting in operational failure
Warning:
This system may fail to yield specified measurement accuracy if
operated or stored in temperature or humidity conditions outside
the limits stated in the specifications section of this manual.
Warning:
The user must check that the equipment functions safely and
see that it is in proper working condition before being used.
Warning:
The device is not suitable for use in the presence of flammable
anesthetic mixtures with air or with oxygen or nitrous oxide.
Warning:
The patient is an intended operator, the functions of monitoring
blood pressure and pulse rate can be safely used by patient. The
routine clean and changing batteries can be performed by the
patient.
Warning:
This device can not be used together with hf surgical equipment.
Use of power adapters
Warning:
1.Adapter: input 100-240V, 50/60hz output DC 5V 1A
2.Do not position the device in a manner which makes it difficult to
operate or disconnect the device while using the adaptor.
3.Do not expose to water, high temperature, moisture, direct
sunlight or any corrosive gas environment. Do not use this product
in the above environment.
Warning:
Too frequent measurements can cause injury to the PATIENT due
to blood flow interference.
Warning:
Don't place the cuff over any wound.
Warning:
Pressurization of the CUFF can temporarily cause loss of function
of simultaneously used monitoring medical equipment on the same
limb.
Caution:
To avoid any possibility of accidental strangulation, keep this unit
away from children and do not drape tubing around your neck.
3
Advertisement
Table of Contents
