Care And Maintenance - MedeScan BPS01 User Manual

5.8. Using the AC Adapter
You may also operate this monitor using the AC adapter (output 5V DC1A with
Type-C connector).
Use only the approved AC adapter to avoid damaging the unit.
a) Ensure that the AC adapter and cable are not damaged.
b) Plug the adapter cable into the AC adapter port on the right side of the
blood pressure monitor.
c) Plug the adapter into your electrical outlet. When the AC adapter is
connected, no battery current is consumed.
Note: No power is taken from the batteries while the AC adapter is connected
to the monitor. If electrical power is interrupted,(e.g., by accidental removal of
the AC adapter from the outlet) the monitor must be reset by removing the
plug from the socket and reinserting the AC adapter connection.
16

6.Care and Maintenance

Wash hands after each time measurement.
If one device is used by different patients, wash hands before and after
each use.
a) Do not expose the device to either extreme temperatures, humidity, dust
or direct sunlight.
b) The cuff contains a sensitive air-tight bubble. Handle this cuff carefully
and avoid all types of stress through twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not use gas, thinners or
similar solvents. Spots on the cuff can be removed carefully with a damp
cloth and soapsuds. The cuff with bladder must not be washed in a
dishwasher, clothes washer, or submerged in water.
d) Handle the tube carefully. Do not pull on it. Do not allow the tubing to
kink and keep it away from sharp edges.
e) Do not drop the monitor or damage it in any way. Avoid strong
vibrations.
f) Never open the monitor! This voids the manufacturer's warranty.
g) Batteries and electronic instruments must be disposed of in accordance
with the locally applicable regulations, not with domest`ic waste.
6.1. Accuracy test
Sensitive measuring devices may need to be checked for accuracy from
time to time. Please contact Medescan customer service if you have doubt
about the measurements obtained.
17